How to Propagate Rabbit Foot Fern


There are two ways to propagate rabbit foot ferns: by spores or by division. Spores are produced in small, round capsules on the underside of the fronds. To propagate by spores, carefully remove a capsule and place it on top of moistened potting mix.

Keep the potting mix moist but not soggy, and in a few weeks, tiny ferns will appear. To propagate by division, wait until the plant has outgrown its pot and then gently pull it apart into smaller pieces, making sure each piece has some roots attached. Plant the divisions in individual pots filled with moistened potting mix and keep them well-watered until they become established.

  • Fill a small pot with moistened potting mix and make a hole in the center big enough to accommodate the root ball of your Rabbit Foot Fern
  • Gently remove your plant from its current pot and loosen any tightly bound roots before planting in the new pot
  • Firmly press the soil around the base of the plant and water thoroughly
  • Place your potted fern in an area that receives indirect sunlight and keep the soil moist but not soggy
  • New leaves will begin to appear within 4-6 weeks
How to Propagate Rabbit Foot Fern

Credit: www.agardenforthehouse.com

Can You Grow Rabbits Foot Fern from Cutting?

No, you cannot grow Rabbits Foot fern from cutting. This plant can only be propagated by division or spores.

How Do You Split a Rabbit Foot Fern?

Assuming you would like tips on splitting a rabbit’s foot fern (Davallia fejeensis): The best time to split your fern is in the spring, after it has had a chance to become established. You will want to use a sharp knife or spade to divide the plant into smaller pieces, making sure each piece has its own rhizome with some roots attached.

You can then pot up the divisions and water them well. Keep them moist but not soggy, and in indirect light until they are established.

Can I Cut the Rhizomes on a Rabbit Foot Fern?

Rabbit foot ferns (Davallia Fejeensis) are a species of fern that are native to Fiji. The plant gets its name from the furry, rabbit-like rhizomes that grow on the surface of the soil. While these rhizomes may look like they should be cut, it is actually not necessary and can even harm the plant.

The reason you don’t want to cut the rhizomes is because they are an important part of the plant’s water and nutrient storage system. If you cut them, you will likely damage the plant and hinder its growth. Additionally, the furry coating on the rhizomes helps protect them from pests and disease.

So, unless you have a very good reason to do so, it’s best to leave your rabbit foot fern’s rhizomes alone!

Is It Easy to Grow Rabbit Foot Fern?

No, it is not easy to grow rabbit foot fern. This plant is native to tropical regions and requires high humidity and moist soil to thrive. It can be difficult to replicate these conditions indoors, so rabbit foot ferns are best suited for outdoor gardens in warm climates.

If you live in an area with cooler temperatures, you can try growing your fern in a terrarium or greenhouse to help maintain the proper environment. With proper care, rabbit foot ferns can make beautiful and unique additions to any home.

How to take and grow on cuttings from your Rabbit Foot Fern in 3 simple steps

Rabbit Foot Fern Water Propagation

One of the easiest ways to propagate a Rabbit Foot Fern is by water. Fill a jar or glass with water and place the rhizome in it, making sure that at least one frond is above the water line. Change the water every few days and within two weeks, you should see new roots growing.

Once the roots are several inches long, you can pot up your fern in moist potting mix.

How to Prune Rabbit’S Foot Fern

If you have a Rabbit’s Foot Fern (Davallia Fejeensis) that is starting to look a bit ragged, you may be wondering how to prune it. This fern is native to Fiji and gets its name from the furry, rabbit-like rhizomes that creep along the soil surface. The fronds of this fern are long and delicate, with a feathery texture.

They can range in color from deep green to silver-gray, depending on the variety. When pruning a Rabbit’s Foot Fern, it is important to do so carefully in order to avoid damaging the plant. Start by removing any dead or dying leaves.

Then, cut back any long or leggy stems. You can also trim off any damaged or browned leaf tips. If your fern is looking particularly scraggly, you can give it a more aggressive pruning by cutting back all of the stems to about 6 inches above ground level.

This will encourage new growth and help your fern to fill out and become more dense. Be sure not to over-prune your Rabbit’s Foot Fern, as this can damage the plant or even kill it. If you are unsure how much to prune, it is always better to err on the side of caution and remove less rather than more.

Rabbit Foot Fern Problems

If your Rabbit Foot Fern isn’t looking its best, it may be experiencing one of several common problems. Here’s a quick guide to help you identify and solve the most common issues: 1. Not enough light – Rabbit Foot Ferns need bright, indirect light to thrive.

If yours is placed in too dark of a spot, it will start to lose its color and look limp. Move it to a brighter location and see if that does the trick. 2. Too much water – Over-watering is the number one killer of houseplants, and Rabbit Foot Ferns are no exception.

Be sure to allow the soil to dry out completely between watering, and don’t leave your fern sitting in water (drain any excess from the saucer after watering). If you think you may have over-watered, try moving your fern to a drier location and cutting back on watering until it recovers. 3. Not enough humidity – These tropical plants love humid conditions but can often suffer in our dry indoor air.

Try misting your fern regularly or placing it on a pebble tray filled with water (be sure the pot isn’t sitting in the water). A humidifier can also do wonders for boosting the humidity around your plant. 4. Pests – Unfortunately, even clean homes can fall prey to pests like aphids, mealybugs, or spider mites.

Check your fern carefully for signs of pests such as webbing or small white bugs and treat accordingly if needed (usually with an insecticidal soap or horticultural oil).

How to Revive Rabbit Foot Fern

Rabbit foot ferns are a type of fern that gets its name from its furry, rabbit-like rhizomes. These plants are native to tropical and subtropical regions of the world and do best in humid climates. If you live in an area with low humidity, you can still grow rabbit foot ferns, but you’ll need to take some extra care to keep them healthy.

Here are some tips on how to revive a rabbit foot fern: 1. Check the plant for pests. Rabbit foot ferns are susceptible to mealybugs, scale insects, and spider mites.

If you see any of these pests on your plant, treat them immediately with an appropriate pesticide or insecticide. 2. Inspect the roots for rot. Healthy roots should be white or light-colored.

If they’re brown or black, it’s a sign of root rot. Cut away any affected roots and replant the fern in fresh potting mix. 3. Water regularly, but don’t overwater.

Ferns need consistent moisture, but too much water can cause problems like root rot or fungal diseases.

Rabbit Foot Fern Repotting

Rabbit Foot Ferns are a type of fern that is native to Africa. They get their name from the furry, fuzzy look of their leaves which resemble a rabbits foot. These plants prefer indirect light and moist soil, making them perfect for indoor growing!

When it comes time to repot your Rabbit Foot Fern, there are a few things you need to keep in mind. First, choose a pot that is only slightly larger than the current one. A plant that is too big for its pot will have trouble taking up water and could experience root rot.

Second, use a well-draining potting mix specifically designed for ferns or make your own by mixing equal parts sphagnum peat moss, perlite, and bark chips or composted pine needles. Third, water your fern thoroughly before repotting and allow the excess water to drain away. Gently remove the plant from its current pot being careful not to damage the roots then place it in the new pot.

Fill in around the roots with your potting mix then water again until evenly moistened but not soggy. Finally, give your fern some time to adjust to its new home before moving it back into its regular spot in your home.

Mounting a Rabbit Foot Fern

If you’re looking to add a little greenery to your home, why not try mounting a rabbit foot fern? This type of fern is relatively easy to care for and makes an attractive addition to any room. Plus, it’s fun to see the fuzzy “rabbit feet” that give this plant its name.

Here’s what you need to know about mounting a rabbit foot fern: What You’ll Need: -A pot or container with drainage holes

-Potting mix -A piece of driftwood, bark, or other natural object for mounting Rabbit Foot Fern Care: Once you have your supplies gathered, it’s time to get started.

Begin by soaking your driftwood in water for several hours (or even overnight). This will help ensure that it doesn’t dry out your fern. Next, mix together some potting soil and water until it’s moist but not soggy.

Place your Driftwood on top of the potting mixture and then gently press the roots of your fern into the mixture around the wood. Be sure not to bury the crown of the plant too deeply. Finally, give your newly mounted fern a good watering and place it in a bright spot out of direct sunlight.

With just a little bit of care, your rabbit foot fern should thrive!

Rabbit Foot Fern Rhizome

Rabbit Foot Fern Rhizome The Rabbit Foot Fern is a rhizomatous fern that gets its name from the furry-looking rhizomes that resemble a rabbit’s foot. The plant is native to tropical areas of Africa, Asia, and Australia, but it can also be found in warm temperate regions.

The Rabbit Foot Fern prefers humid conditions and does best in partial shade to full shade. It will tolerate some sun if the soil is kept moist. This fern has long-stalked fronds that are pinnate or bi-pinnate and have a ruffled appearance.

The new growth on this plant is often red or purple in color. The fronds can grow up to 2 feet long and the plant itself can reach heights of 3 feet tall. The Rabbit Foot Fern reproduces by spores that are produced on the undersides of the fronds.

In order to germinate these spores, they must be kept moist until they are ready to be transplanted into soil. Once they have been transplanted, they will slowly start to form new plants. Because of this slow reproduction process, Rabbit Foot Ferns are not commonly seen for sale in stores or nurseries.

Rabbit Foot Fern Care

Rabbit Foot Fern Care: Detailed information on how to take care of your Rabbit Foot Fern. The Rabbit Foot Fern (Davallia fejeensis) is a beautiful, unique plant that makes a great addition to any indoor space. Though they’re not true ferns, rabbit foot ferns have all the same features: lovely, delicate leaves that come in a variety of colors, including green, burgundy, and even black.

They’re also easy to care for, as long as you know a few key things about their needs. Here are some tips on how to keep your Rabbit Foot Fern happy and healthy: Light: Rabbit foot ferns prefer indirect sunlight or bright, filtered light.

If you can provide them with a spot near a window where they’ll get some morning sun and afternoon shade, that’s ideal. Avoid placing them in direct sunlight, as this can scorch their leaves. Water: These plants like to be kept moist at all times, but beware of overwatering them.

Water your fern thoroughly until water runs out the bottom of the pot, then allow the soil to dry out slightly before watering again. It’s better to err on the side of too little water than too much – if the soil is too wet, the roots will rot. Brown tips on the leaves are usually an indication that the plant is getting too much or not enough water – adjust accordingly!

Fertilizer: A half-strength solution of liquid fertilizer applied every other week during growing season (spring through summer) will keep your rabbit foot fern looking its best. Be sure to flush the pot with fresh water monthly to prevent buildup of salts from the fertilizer. Soil: A well-drained potting mix is essential for these plants – they don’t like soggy feet!

A good mix for rabbit foot ferns contains equal parts peat moss and perlite or sand. You can also add a small amount of bark chips or charcoal to improve drainage further.


Although Rabbit Foot Ferns are typically propagated by division, you can also propagate them from spores. To do this, you will need to find a mature fern that is producing spores. Once you have found a mature fern, carefully remove a leaf and place it in a moist paper towel.

Put the paper towel inside of a plastic bag and seal it. Place the bag in a warm area with indirect sunlight and wait for the spores to germinate. Once the spores have germinated, you can plant them in potting soil.

Related Tags


Emmanuel Orta
Emmanuel Orta

Hi, I am Emmanuel, and I love everything about insects, plants and building terrariums.

Leave a Comment

Your email address will not be published. Required fields are marked *




Recommended articles​



Recommended articles

Shopping Cart

+1 234 56 78 123